20KHGNM Alloy structural steel

Steelun Designation of 20KHGNM Alloy structural steel:

Name The value
Designation GOST Cyrillic 20ХГНМ
Designation GOST Latin 20XGHM
Transliteration 20HGNM
By chemical elements 20CrMnНMo

Description Steelun of 20KHGNM Alloy structural steel:

20KHGNM steel is used: for the manufacture of critical parts in case hardening and an improved condition, and requirements of high strength, toughness and wear resistance; parts exposed to high vibration and dynamic loads; tools and accessories at the Volga automobile plant by type, used by «FIAT».

Note

Steel structural quality homomorphically molybdenum.
Steel can be used at temperatures from -70 to +450 °C.

Steelun Standards of 20KHGNM Alloy structural steel:

Name Code Standards
Bars and shapes В32 GOST 4543-71, GOST 14955-77, TU 14-1-5414-2001, TU 14-1-2118-77, TU 14-1-4151-86, TU 0951-092-00187895-97, TU 14-11-245-88, TU 14-1-5452-2002, TU 14-1-2252-2007, TU 14-1-1648-76, TU 14-136-367-2008
Bars and shapes В22 GOST 8319.0-75, TU 0951-092-00187895-01
Blanks. Of the workpiece. Slabs В31 OST 3-1686-90, TU 14-1-4944-90
Sheets and strips В33 TU 14-1-518-73
Steel pipes and fittings to them В62 TU 14-159-244-94

Chemical composition Steelun of 20KHGNM Alloy structural steel:

Standard C S P Mn Cr Si Ni Fe Cu V Ti Mo W
TU 14-1-518-73 0.18-0.23 ≤0.035 ≤0.035 0.7-1.1 0.4-0.7 0.17-0.37 0.4-0.7 Rest 0.15-0.25
GOST 4543-71 0.18-0.23 ≤0.035 ≤0.035 0.7-1.1 0.4-0.7 0.17-0.37 0.4-0.7 Rest ≤0.3 ≤0.05 ≤0.03 0.15-0.25 ≤0.2
Fe is the basis.
According to GOST 4543-71 the content in high-quality steel is regulated: P≤0,025%; S≤0.025%; Сu≤0.30%; in high-grade steel: P≤0,025%; S≤0.015%; Сu≤0.25%.
According to TU 14-1-518-73, the total content of sulfur and phosphorus in the steel should not be more than 0.060%. In the finished rolled products, if all the requirements of the technical specifications are met, deviations from the chemical composition standards are allowed in accordance with Table 3 of GOST 4543.

Steelun Mechanical properties of 20KHGNM Alloy structural steel:

Section, mm sT|s0,2, MPa σU, MPa d5, % KCU, kJ/m2 HB, MPa
High-quality and sheet hire. Quenching in oil from 860±10 °C + Vacation at 150-180 °C, air cooling
25 ≥885 ≥1180 ≥7 ≥588 ≤235

Description mechanical marks steelun of 20KHGNM Alloy structural steel:

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σU Limit short-term strength
d5 Elongation after rupture
KCU Toughness
HB Brinell hardness number

You might also like

Alloy Steel

10ГН (10ГНА) Alloy structural steel

Steelun Designation of 10ГН (10ГНА) Alloy structural steel: Name The value Designation GOST Cyrillic 10ГН Designation GOST Latin 10GH Transliteration 10GN By chemical elements 10MnН Name The value Designation GOST Cyrillic

Structural Steel

15НМ Alloy structural steel

Steelun Designation of 15НМ Alloy structural steel: Name The value Designation GOST Cyrillic 15Н2М Designation GOST Latin 15H2M Transliteration 15N2M By chemical elements 15Н2Mo Name The value Designation GOST Cyrillic 15НМ

Structural Steel

13HFA Alloy structural steel

Steelun Designation of 13HFA Alloy structural steel: Name The value Designation GOST Cyrillic 13ХФА Designation GOST Latin 13XFA Transliteration 13HFA By chemical elements 13CrV Name The value Designation GOST Cyrillic 13ХФ