Hiperco 50A Bar 51.2 mm

Steelun Steel Standards of Hiperco 50A Bar 51.2 mm:

ASTM A801 Alloy 1

Equivalent standards of Hiperco 50A Bar 51.2 mm:

UNS R30005,MIL A 47182,AMS A 47182

Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Steelun Description of Hiperco 50A Bar 51.2 mm:

An alloy of 49% cobalt, and 2% vanadium, balance iron, Hiperco 50 and Hiperco 50A have the highest magnetic saturation of all soft-magnetic alloys and excel in applications where this attribute is needed. Hiperco 50 maintains its strength after heat treating making it your best choice for applications that experience high forces (e.g. rotating parts).

Chemical composition Steelun of Hiperco 50A Bar 51.2 mm:

Element Weight %  
Fe balance
Ni 48.75
V 2.0
Mn 0.05
Si 0.05
C 0.01

Steelun Properties of Hiperco 50A Bar 51.2 mm:

Dimension
Length [ l ] 3050—3666 mm Mill random length
Width [ w ] 51.20 mm
Electrical
Electrical resistivity [ ρel ] 4E-7 Ω·m
General information
Density [ ρ ] 8.12 g/cm³
Magnetic
Curie temperature [ Tc ] 940.00 °C
Mechanical
Elastic modulus [ E ] 207.00 GPa
Elongation [ A ] 7.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 20.00 [-]
Tensile strength [ Rm ] 717.00 MPa
Yield strength [ YS ] 365.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 1.04E-5 1/K at 450 °C
Melting point [ Tm ] 1427 °C
Specific heat capacity [ cp ] 420.00 J/(kg·K)
Thermal conductivity [ λ ] 29.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Hiperco 50A Bar 51.2 mm:

Application areas
A common application of HIPERCO 50A is: Transformer laminations

Steelun Applications of Hiperco 50A Bar 51.2 mm:

Power Transformers,Electrical Engineering

You might also like

Material

Invar® 36 Free-Machined Round Bar 25.4 mm

Steelun Steel Standards of Invar® 36 Free-Machined Round Bar 25.4 mm: ASTM F1684 Equivalent standards of Invar® 36 Free-Machined Round Bar 25.4 mm: AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03 Equivalent standards

Material

Molybdenum Deep Drawable Sheet 0.2 mm

Steelun Steel Standards of Molybdenum Deep Drawable Sheet 0.2 mm: ASTM B 386 Type 361 Steelun Description of Molybdenum Deep Drawable Sheet 0.2 mm: With its unique mechanical and chemical properties,

Material

Invar® 36 Plate 25.4 mm

Steelun Steel Standards of Invar® 36 Plate 25.4 mm: ASTM F1684 Equivalent standards of Invar® 36 Plate 25.4 mm: AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03 Equivalent standards are similar to one