Invar® 36 Free-Machined Round Bar 12.7 mm

Steelun Steel Standards of Invar® 36 Free-Machined Round Bar 12.7 mm:

ASTM F1684

Equivalent standards of Invar® 36 Free-Machined Round Bar 12.7 mm:

AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03

Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Steelun Description of Invar® 36 Free-Machined Round Bar 12.7 mm:

Invar® is a low expansion alloy consisting of 36% nickel, balance iron.

Chemical composition Steelun of Invar® 36 Free-Machined Round Bar 12.7 mm:

Element Weight %  
Fe balance
Ni 36.0
Mn 0.35
Cr 0.25
Si 0.2
C 0.02
S 0.015

Steelun Properties of Invar® 36 Free-Machined Round Bar 12.7 mm:

Dimension
Diameter [ d ] 12.70 mm
Length [ l ] 3050—3664 mm Mill random length
Electrical
Electrical resistivity [ ρel ] 4.95E-6 Ω·m
General information
Density [ ρ ] 8.05 g/cm³
Magnetic
Curie temperature [ Tc ] 279.00 °C
Mechanical
Elastic modulus [ E ] 141.00 GPa
Elongation [ A ] 34.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 80.00 [-]
Poisson’s ratio [ ν ] 0.29 [-]
Tensile strength [ Rm ] 518.00 MPa
Yield strength [ YS ] 276.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 1.9E-6 1/K at 100 °C
1001502002503003504005006000.00000190.00000440.00000690.0000118
Melting point [ Tm ] 1427 °C
Specific heat capacity [ cp ] 502.00 J/(kg·K)
Thermal conductivity [ λ ] 10.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Invar® 36 Free-Machined Round Bar 12.7 mm:

Application areas
Common applications of Free-Cut Invar 36 are: Aircraft controls, electronic devices

Steelun Applications of Invar® 36 Free-Machined Round Bar 12.7 mm:

Aerospace Engines & Propulsion,Optoelectronics,Electronic Components,Aerospace,Aerospace On-board Equipment & Instruments,Electronics,Aerospace Materials,Defense

You might also like

Material

Monel K-500

Steelun Steel Standards of Monel K-500: UNS N05500 Equivalent standards of Monel K-500: DIN EN 2.4375 – NiCu30Al ISO NiCu30Al3Ti Equivalent standards are similar to one or more standards provided by

Material

VDM® Alloy 600

Steelun Steel Standards of VDM® Alloy 600: UNS N06600 Equivalent standards of VDM® Alloy 600: DIN EN 2.4816 – NiCr15Fe,ISO NiCr15Fe8,BS NA 14 Equivalent standards are similar to one or more

Material

Molybdenum Annealed, Pickled Wire 2 mm

Steelun Description of Molybdenum Annealed, Pickled Wire 2 mm: With its unique mechanical and chemical properties, molybdenum is an outstanding material that can meet the most exacting requirements. Because molybdenum