Invar® 36 Sheet 1.6 mm

Steelun Steel Standards of Invar® 36 Sheet 1.6 mm:

ASTM F1684

Equivalent standards of Invar® 36 Sheet 1.6 mm:

AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03

Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Steelun Description of Invar® 36 Sheet 1.6 mm:

Invar® is a low expansion alloy consisting of 36% nickel, balance iron.

Chemical composition Steelun of Invar® 36 Sheet 1.6 mm:

Element Weight %  
Fe — balance
Ni 36.0
Mn 0.35
Cr 0.25
Si 0.2
C 0.02
S 0.015

Steelun Properties of Invar® 36 Sheet 1.6 mm:

Dimension
Length [ l ] 1829 mm
Thickness [ t ] 1.60 mm
Width [ w ] 609.60 mm
Electrical
Electrical resistivity [ ρel ] 4.95E-6 Ω·m
General information
Density [ ρ ] 8.05 g/cm³
Magnetic
Curie temperature [ Tc ] 279.00 °C
Mechanical
Elastic modulus [ E ] 141.00 GPa
Elongation [ A ] 34.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 80.00 [-]
Poisson’s ratio [ ν ] 0.29 [-]
Tensile strength [ Rm ] 518.00 MPa
Yield strength [ YS ] 276.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 1.9E-6 1/K at 100 °C
1001502002503003504005006000.00000190.00000440.00000690.0000118
Melting point [ Tm ] 1427 °C
Specific heat capacity [ cp ] 502.00 J/(kg·K)
Thermal conductivity [ λ ] 10.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Invar® 36 Sheet 1.6 mm:

Application areas
Common applications of Free-Cut Invar 36 are: Aircraft controls, electronic devices

Steelun Applications of :

Aerospace Engines & Propulsion,Optoelectronics,Electronic Components,Aerospace,Aerospace On-board Equipment & Instruments,Electronics,Aerospace Materials,Defense

Tags AMS l-23011 CL7ASTM F1684Invar® 36 Sheet 1.6 mmMIL l-23011 CL7UNS K93602/03
Category Material

You might also like

Material

VDM Alloy 31 Plus®

Steelun Steel Standards of VDM Alloy 31 Plus®: Alternative and trade names Nicrofer 3426 hMo UNS N08034 Equivalent standards of VDM Alloy 31 Plus®: DIN EN 2.4692,ISO NiFeCr27Mo6CuN Equivalent standards are

Material

Tungsten Ground Rod 16 mm

Steelun Description of Tungsten Ground Rod 16 mm: Tungsten has the highest melting point of all metals and is therefore also suitable for very high-temperature applications. It is also characterized

Material

Kovar® Bar 2.4 mm

Steelun Steel Standards of Kovar® Bar 2.4 mm: Alternative and trade names Pernifer 2918®, Dilvar P1®, NILO K® ASTM F15/F1466 Equivalent standards of Kovar® Bar 2.4 mm: AMS l-23011 CL1,MIL l-23011