Kovar® Bar 57.2 mm

Steelun Steel Standards of Kovar® Bar 57.2 mm:

Alternative and trade names
Pernifer 2918®, Dilvar P1®, NILO K®

ASTM F15/F1466

Equivalent standards of Kovar® Bar 57.2 mm:

AMS l-23011 CL1,MIL l-23011 CL1,UNS K94610

Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Steelun Description of Kovar® Bar 57.2 mm:

Kovar is a controlled expansion alloy. It is a nickel iron alloy with 29% nickel, 17% cobalt and the remaining balance is iron.

Chemical composition Steelun of Kovar® Bar 57.2 mm:

Element Weight %  
Fe — balance
Ni 29.0  
Co 17.0  
Cr 0.2  
Si 0.2  
C 0.02  

Steelun Properties of Kovar® Bar 57.2 mm:

Dimension
Width [ w ] 57.20 mm
Electrical
Electrical resistivity [ ρel ] 4E-7 Ω·m
General information
Density [ ρ ] 8.36 g/cm³
Magnetic
Curie temperature [ Tc ] 435.00 °C
Mechanical
Elastic modulus [ E ] 207.00 GPa
Elongation [ A ] 30.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 80.00 [-]
Tensile strength [ Rm ] 518.00 MPa
Yield strength [ YS ] 276.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 5.8E-6 1/K at 100 °C
 
Melting point [ Tm ] 1449 °C
Specific heat capacity [ cp ] 460.00 J/(kg·K)
Thermal conductivity [ λ ] 17.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Kovar® Bar 57.2 mm:

Application areas
Common applications of Kovar: Glass-to-metal hermetic sealing with hard borosilicate glass, ceramic-to-metal sealing, power tubes, microwave tubes, transistors, diodes, integrated circuits

Steelun Applications of Kovar® Bar 57.2 mm:

Resistors,Electronic Tubes,Optoelectronics,Seals,Electronics,Mechanical Systems,Microelectronics,Transistors,Semiconductor Devices,Diodes

Tags AMS l-23011 CL1ASTM F15/F1466Kovar® Bar 57.2 mmMIL l-23011 CL1UNS K94610
Category Material

You might also like

Material

Tungsten Smooth Forged Rod 40 mm

Steelun Description of Tungsten Smooth Forged Rod 40 mm: Tungsten has the highest melting point of all metals and is therefore also suitable for very high-temperature applications. It is also

Material

Invar® 36 Sheet 1.6 mm

Steelun Steel Standards of Invar® 36 Sheet 1.6 mm: ASTM F1684 Equivalent standards of Invar® 36 Sheet 1.6 mm: AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03 Equivalent standards are similar to one

Material

Alloy 42 Annealed Sheet 0.8 mm

Steelun Steel Standards of Alloy 42 Annealed Sheet 0.8 mm: ASTM F30 Equivalent standards of Alloy 42 Annealed Sheet 0.8 mm: AMS l-23011 CL5,MIL l-23011 CL5 Equivalent standards are similar to