Molybdenum Annealed, Pickled Wire 2.5 mm

Steelun Description of Molybdenum Annealed, Pickled Wire 2.5 mm:

With its unique mechanical and chemical properties, molybdenum is an outstanding material that can meet the most exacting requirements. Because molybdenum possesses a very high melting point, a low coefficient of thermal expansion and a high level of thermal conductivity, it is used in many different industries. Molybdenum is a genuine all-rounder.

Chemical composition Steelun of Molybdenum Annealed, Pickled Wire 2.5 mm:

Element Weight %  
Mo 99.97
W 0.0169
C 0.0013
O 6.0E-4
K 6.0E-4
Fe 5.0E-4
N 5.0E-4
Cr 3.0E-4
Si 2.0E-4
Cu 2.0E-4
Al 1.0E-4
Ni 1.0E-4
Cd 1.0E-4

Steelun Properties of Molybdenum Annealed, Pickled Wire 2.5 mm:

Acoustical
Sound speed, longitudinal [ clong ] 6250 m/s
Sound speed, transversal [ ctrans ] 3350 m/s
Dimension
Diameter [ d ] 2.50 mm
Electrical
Electron work function [ We ] 4.39 eV
General information
Density [ ρ ] 10.20 g/cm³
Neutron capture cross-section [ σN ] 2.7E-27 
Mechanical
Elongation [ A ] 10.00 %
Tensile strength [ Rm ] 650.00—1000 MPa
Thermal
Melting point [ Tm ] 2620 °C

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Molybdenum Annealed, Pickled Wire 2.5 mm:

Application areas
Molybdenum-wire is used in a wide variety of high temperature applications. Typical applications are the lighting industry, conductor elements and fabric components in furnace construction and special applications.

Steelun Applications of Molybdenum Annealed, Pickled Wire 2.5 mm:

Industrial Furnaces,Capacitors,Lighting,Electronics,Manufacturing

You might also like

Material

Molybdenum Deep Drawable, Pickled Sheet 2.5 mm

Steelun Steel Standards of Molybdenum Deep Drawable, Pickled Sheet 2.5 mm: ASTM B386 Type 361 Equivalent standards of Molybdenum Deep Drawable, Pickled Sheet 2.5 mm: Equivalent standards are similar to one

Material

Invar 36®

Steelun Steel Standards of Invar 36®: ASTM F1684 Equivalent standards of Invar 36®: AMS l-23011 CL7, MIL l-23011 CL7,UNS K93602/03 Equivalent standards are similar to one or more standards provided by

Material

EFI Alloy 79 Bar 25.4 mm

Steelun Steel Standards of EFI Alloy 79 Bar 25.4 mm: ASTM A753 Type 4 Equivalent standards of EFI Alloy 79 Bar 25.4 mm: UNS N14080,MIL N-1441C Equivalent standards are similar to