Nickel 201 Strip/Coil 1.6 mm

Steelun Steel Standards of Nickel 201 Strip/Coil 1.6 mm:

ASTM B 160

Equivalent standards of Nickel 201 Strip/Coil 1.6 mm:

ASTM B 162

Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Steelun Description of Nickel 201 Strip/Coil 1.6 mm:

Commercially pure, unalloyed Nickel.

Chemical composition Steelun of Nickel 201 Strip/Coil 1.6 mm:

Element Weight %  
Ni 99.5  
Si 0.25  
Fe 0.25  
C 0.02  
S 0.01  

Steelun Properties of Nickel 201 Strip/Coil 1.6 mm:

Dimension
Thickness [ t ] 1.60 mm
Width [ w ] 304.80 mm
Electrical
Electrical resistivity [ ρel ] 8.5E-8 Ω·m
General information
Density [ ρ ] 8.89 g/cm³
Magnetic
Curie temperature [ Tc ] 360.00 °C
Mechanical
Elastic modulus [ E ] 207.00 GPa
Elongation [ A ] 40.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 80.00 [-]
Tensile strength [ Rm ] 449.00 MPa
Yield strength [ YS ] 138.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 1.3E-5 1/K at 450 °C
Melting point [ Tm ] 1440 °C
Specific heat capacity [ cp ] 452.00 J/(kg·K)
Thermal conductivity [ λ ] 79.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Nickel 201 Strip/Coil 1.6 mm:

Application areas
Common applications of Nickel 201: Getter tabs, heating element sheathing, anodes, fuel cells, special purpose electron tubes, transistor enclosures, cathode shields, spark gaps

Steelun Applications of Nickel 201 Strip/Coil 1.6 mm:

Electrodes,Components for Electrical Equipment,Electronics,Fuel Cells,Transistors,Electrical Engineering

You might also like

Material

Tungsten Ground Rod 6 mm

Steelun Description of Tungsten Ground Rod 6 mm: Tungsten has the highest melting point of all metals and is therefore also suitable for very high-temperature applications. It is also characterized

Material

Tungsten Bright Sheet 0.1 mm

Steelun Steel Standards of Tungsten Bright Sheet 0.1 mm: ASTM B 386 Type 361 Steelun Description of Tungsten Bright Sheet 0.1 mm: Tungsten has the highest melting point of all metals

Material

Molybdenum Deep Drawable, Pickled Sheet 2 mm

Steelun Steel Standards of Molybdenum Deep Drawable, Pickled Sheet 2 mm: ASTM B386 Type 361 Equivalent standards of Molybdenum Deep Drawable, Pickled Sheet 2 mm: ASTM B 760 Equivalent standards are