Nickel 233 Bar 19.1 mm

Steelun Steel Standards of Nickel 233 Bar 19.1 mm:

ASTM F 3 Grade 3

Steelun Description of Nickel 233 Bar 19.1 mm:

Commercially pure, unalloyed Nickel.

Chemical composition Steelun of Nickel 233 Bar 19.1 mm:

Element Weight %  
Ni 99.5  
Fe 0.2  
C 0.1  
Si 0.1  
Mg 0.01 — 0.1  
Ti 0.05  
S 0.008  

Steelun Properties of Nickel 233 Bar 19.1 mm:

Dimension
Width [ w ] 19.10 mm
Electrical
Electrical resistivity [ ρel ] 7.7E-8 Ω·m
General information
Density [ ρ ] 8.89 g/cm³
Magnetic
Curie temperature [ Tc ] 360.00 °C
Mechanical
Elastic modulus [ E ] 207.00 GPa
Elongation [ A ] 40.00 % at 20 °C in 2 in.
Hardness, Rockwell B [ HRB ] 80.00 [-]
Tensile strength [ Rm ] 449.00 MPa
Yield strength [ YS ] 138.00 MPa
Thermal
Coefficient of thermal expansion [ α ] 1.3E-5 1/K at 450 °C
Melting point [ Tm ] 1440 °C
Specific heat capacity [ cp ] 452.00 J/(kg·K)
Thermal conductivity [ λ ] 81.00 W/(m·K)

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.

Technological properties Steelun of Nickel 233 Bar 19.1 mm:

Application areas
Common applications of Nickel 233: Getter tabs, heating element sheathing, anodes, fuel cells, special purpose electron tubes, transistor enclosures, cathode shields, spark gaps

Steelun Applications of Nickel 233 Bar 19.1 mm:

Electrodes,Components for Electrical Equipment,Electronics,Fuel Cells,Transistors,Electrical Engineering

You might also like

Material

Molybdenum Pickled Sheet 40 mm

Steelun Steel Standards of Molybdenum Pickled Sheet 40 mm: ASTM B386 Type 361 Equivalent standards of Molybdenum Pickled Sheet 40 mm: ASTM B 760 Equivalent standards are similar to one or

Material

Invar® 36 Free-Machined Round Bar 57.2 mm

Steelun Steel Standards of Invar® 36 Free-Machined Round Bar 57.2 mm: ASTM F1684 Equivalent standards of Invar® 36 Free-Machined Round Bar 57.2 mm: AMS l-23011 CL7,MIL l-23011 CL7,UNS K93602/03 Equivalent standards

Material

Tungsten Bright Sheet 0.3 mm

Steelun Steel Standards of Tungsten Bright Sheet 0.3 mm: ASTM B 386 Type 361 Steelun Description of Tungsten Bright Sheet 0.3 mm: Tungsten has the highest melting point of all metals